Jinan Shun Long Machinery Co., Ltd.
Jinan Shun Long Machinery Co., Ltd.
Add to Cart
500L Beer Brewing kit with three vessles brewhouse
Product Description
| Mash | 500L | Mashing Process: Decoction. Infusion. Multi-step infusion Heating source: Steam, Electric, Gas SUS304 / Red copper |
| Lauter tun | 500L | |
| Brew Kettle/ Whirlpool Tank | 500L | |
| Fermentation Tank | 500L / 1000L | Top manway / Side manway Drying hop port to brew IPA Dimple Plate Cooling jacket Carbonation port to fill CO2 |
Characters
i Brew house
Inner SUS304 Stainless Steel thickness: 3.0mm
External SUS 304 Stainless Steel thickness: 2.0mm
Insulation: Polyurethane thickness: 80mm.
Mash tun, Lauter tun, Boiling Kettle, Whirlpool tun in various combination
360° CIP spraying ball
Stream heating, dimplate plate steam jacket thickness: 3mm
Equipped with: Grain rake and agitator
Temperature measurement: Temperature Probe PT100
Food grade centrifugal pump VFD
Mash infusion process
ii Fermentation tank
Dimple plate cooling jacket, thickness:1.5mm
Dry hopping port
Stringent tank and Jacket leakage test by water and pressured gas, Tank design pressure is 0.3Mpa
Cone 60° resist compression design, dripping temperature drop
Carbonation port and stone for special request
Temperature display: PT100
Inner SUS304 Stainless Steel thickness: 3.0mm
External SUS 304 Stainless Steel thickness:2.0mm
Insulation: Polyurethane thickness: 100mm.
Tri clamp discharge arm with butterfly valve
360° CIP spraying ball
Cooling Unit
1. Insulated glycol water tank with or without copper coil for glycol liquid holding and mixing
2. Efficiency chillers or refrigerators with fryon to supply cooling energy
3. Sanitary centrifugal pump for glycol water recycle among tanks and heat exchanger
4. All pipes, fitting, insulation materials are included
Control Unit
1. Mashing Pump on/off excluded VFD
2. Temperature display and Auto/Manu heating Control for brewhouse tanks
3. Auto/Manu Glycol Water Pump control
4. Auto/Manu Chiller control
5. Temperature display and Auto/Manu Control for FVs and BBTs
6. Temperature display and Control for GWT and CLT
7. Temperature controller, thermocouple, solenoid valves etc are included
8. PLC S7200 Siemens
Others
Portable CIP system for cleaning the tanks
Steam boiler for brewhouse heating
Water treatment for brew water
Oil free air compressor
Outside surface
Stainless steel or red copper,THK:1.5mm-3mm
Inner surface
S.S.304,THK:2mm-4mm
Top shape
Seal head or conical head
Heating method
Natural gas/electricity/LPG/direct fire
Insulation layer
Protected by rockwool,THK:70-100mm
Polishing
≤0.4µm
Manhole
Side upward
Spral ball
In the center of the inside tank
Agitator
Raking system conneted into a top reducer
Chimney
On the top of the tank
Jinan Shun Long Service
Before-Sales Service
1. Layout Design for new build brewery
Our experienced engineer( more than ten years) will provide the detailed layout according to your brewery, if needed, we will fly to your brewery at our cost.
2. Exist Brewery Expansion
Expansion of the brew house, beer tanks, or other parts, we will design and manufacture as per your exist brewery.
3. Effective business communication
Our sales team are young and rich of experience, we are full of passion, all of us have been in this business line for more than 8 years, and they are graduated from UK, Russia etc.
4. Brewing consultant
We also bult a good relation with Shandong university and other institutes who are expert in beer brewing, we are capable to provide the most advanced brewing technology.